 |
Ellis Guardrail Products - [Back to Main Products Page]
 Click here to see info. on our 36" Guardrail Stanchion.
Slip On Guard Rail Bracket_______________________________________
 
Specifications:
Weight: 6 lbs
Material: 4”x4”x6” square tubing ¼” x 1” flat bar
Description: Fits 4x4 posts and 4x6 or 4x4 stringers or joists
Item #: SGB-4
Simple to use: This guard rail bracket will slip onto a 4x6 stringers or can be turned over to fit 4x4 joists. To correctly install (as pictured in the drawing above), nail the Guardrail Bracket in position so the intended force is pushing in an opposite direction of the steel bar stop attached to purlin or joist. Then drop in a 4x4 post and secure it with nails through the holes in the tubing. Lastly, nail 2x4 horizontal rails on 4x4 post at preferred heights.
Perimeter Protection Post
These Protection posts go around the perimeter of the structure while the stringers and joists are in place. Each post will fit certain sizes of lumber. Side rails and top rails can be a 2x4, 3x4, or 4x4.
Specifications:
Weight: 12 lbs.
Pipe Size: 1" sched. 40 x 42" long.
Item #: PPP-34, PPP-44, PPP-46
Please Call 800.654.8311 For Pricing
Twistlock Guard Rail Brackets____________________________________
Attaches easily to aluminum stringers or joists which measure 3.25 inches across the top flange. Twist on and tack down to the wooden nailer. Drop a 4x4 or pipe down into the pocket for the post. Lastly, nail 2x4 horizontal rails on 4x4 post at preferred heights
Specifications:
4"x4"x6" steel tubing
3/16" x 3" steel strip
Weight: 6 lbs
Item #: TGB-L (Lumber Post)
Below is the Twist-Lock Guardrail Bracket for Building Metal Guardrails (used w/ PPP-1).
 
Specifications:
3/16" x 3" steel strip
1-1/4" x 4" Schedule 40 Pipe
Weight: 6 lbs
Item #: TGB-M (Metal Post)
Perimeter Protection Post (PPP-1) (used w/ TGB-M
 
Item #: PPP-1
All items on this page will exceed OSHA's requirements of 200 lbs. load test.
Click here to see info. on our 36" Guardrail Stanchion
|
